home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
QRZ! Ham Radio 4
/
QRZ Ham Radio Callsign Database - Volume 4.iso
/
digests
/
antenna
/
940126.txt
< prev
next >
Wrap
Internet Message Format
|
1994-11-13
|
4KB
Date: Fri, 29 Apr 94 04:30:15 PDT
From: Ham-Ant Mailing List and Newsgroup <ham-ant@ucsd.edu>
Errors-To: Ham-Ant-Errors@UCSD.Edu
Reply-To: Ham-Ant@UCSD.Edu
Precedence: Bulk
Subject: Ham-Ant Digest V94 #126
To: Ham-Ant
Ham-Ant Digest Fri, 29 Apr 94 Volume 94 : Issue 126
Today's Topics:
Cheap Antenna Insulators
vertical dipole
What mounts well on an Accord
Send Replies or notes for publication to: <Ham-Ant@UCSD.Edu>
Send subscription requests to: <Ham-Ant-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the Ham-Ant Digest are available
(by FTP only) from UCSD.Edu in directory "mailarchives/ham-ant".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
----------------------------------------------------------------------
Date: Fri, 29 Apr 1994 04:11:04 GMT
From: swrinde!emory!cs.utk.edu!stc06r.CTD.ORNL.GOV!fnnews.fnal.gov!nntp-server.caltech.edu!news.claremont.edu!paris.ics.uci.edu!csulb.edu!csus.edu!netcom.com!netcomsv!bongo!@@ihnp4.ucsd.edu
Subject: Cheap Antenna Insulators
To: ham-ant@ucsd.edu
Cheap Antenna Insulators
In my continued hunt for cheap antenna parts, I have located
a cheap source of antenna insulators.
At the swapmeets, you can buy black plastic egg type
insulators for about $1.25 each. At Menards farm and hardware
store (Wisconsin and Minnesota) you can buy one plastic egg
insulator for $0.085 (Yes, 8.5 cents). They seem to be identical
to the black plastic ones, except they are optic yellow, rather
than Ninja black. The plastic of both appears to be ABS.
For eighty-five cents, you get a baggy of 10 "Corner Post
Insulators". These are sold by "Red Snap'r (sic) Electric Fencing
Systems". They are made by North Central Plastic Incorporated,
Ellendale, Minnesota 56026. Part No. YTRC10.
I am still looking for a source of 14 AWG 7 strand bare
copper wire. Radio Shack carries it in 75 ft lengths. I am
looking for spools of 1,000 ft.
--
Julian Macassey, N6ARE julian@bongo.tele.com Voice: (414) 457-0874
Paper Mail: 210 Bleyer Drive, Sheboygan, Wisconsin 53081-8712
------------------------------
Date: 29 Apr 1994 07:55:29 GMT
From: agate!howland.reston.ans.net!EU.net!dkuug!eunet.no!nuug!trane.uninett.no!ugle.unit.no!stud.unit.no!kenneth@ames.arpa
Subject: vertical dipole
To: ham-ant@ucsd.edu
hi,
I intend to set up a new antenna for 20-10 m, and wonder if anybody can tell
me abt the performance of a vertical dipole compared to some other 'famous'
verticals. How is this vertical dipole compared to a horisontal one ??
I have very limited space and also want to use as light material as possible.
How about setting up an off-center fed vertical dipole, instead of this
center fed one ??
thanks in advance,
kenneth.
------------------------------
Date: Fri, 29 Apr 1994 00:00:52 GMT
From: ihnp4.ucsd.edu!pacbell.com!amdahl!juts.ccc.amdahl.com!p1dbg02!dws30@network.ucsd.edu
Subject: What mounts well on an Accord
To: ham-ant@ucsd.edu
Yes Me Again....
Have the antenna figured out but am still looking for a non
destructive mount to attatch to the trunk lid of my Honda Accord (89).
Anyone care to shed some light on what works.
--
--------------------------------------------------------------------------
Dave Sharpe Sunnyvale Ca. DWS30@duts.ccc.amdahl.com
--------------------------------------------------------------------------
------------------------------
End of Ham-Ant Digest V94 #126
******************************